What is Standard SMD/LED? Standard SMD modules are traditional LED display modules where the LEDs are mounted directly onto the surface of the PCB. These are widely used due to their high brightness and cost-effectiveness. What is GOB? GOB stands for (Glue on Board). It refers to a technology where a transparent protective layer is applied over a standard SMD module. This layer enhances durability by protecting the LEDs from impact, dust, moisture, and other environmental factors.
Why choose standard SMD/LED over GOB? Here are several reasons why standard SMD/LED screens may be a better choice compared to GOB: 1. Lower Cost Standard SMD/LED screens are generally more cost-effective than GOB displays. 2. Higher Brightness Standard SMD/LED screens typically offer higher brightness levels, which can enhance visibility, especially in well-lit environments. 3. Suitable for Elevated Installations When the display is mounted at a height, standard SMD/LED is preferable since there’s minimal risk of physical contact or impact. 4. Fixed Installation If the display is intended for a permanent location with no plans to relocate, standard SMD/LED is a better choice. Relocating a display can damage pixels, especially with GOB technology. 5. Clean Environment Standard SMD/LED performs well in clean, dust-free environments where extra protection (like that offered by GOB) isn’t necessary. 6. Repairability Standard modules have exposed lamps/pixels, making them easier and more cost-effective to repair. If a pixel is damaged due to impact or other factors, it can be replaced individually with minimal expense. Why choose GOB over Standard SMD/LED? GOB (Glue on Board) screens offer several advantages that make them a strong alternative to standard SMD/LED modules: 1. Improved Colour Uniformity The protective layer on GOB modules ensures more consistent colour distribution across the display. 2. Enhanced Physical Protection The front coating shields pixels and lamps from accidental impacts or physical damage. 3. Resistance to Dust and Moisture The protective layer acts as a barrier against dust, water, and humidity, making GOB suitable for more demanding environments. 4. Easy to Clean The smooth, sealed surface can be easily wiped clean with a cloth, simplifying maintenance. 5. Longer Lifespan GOB modules generally have a longer lifespan compared to standard SMD modules, due to their enhanced durability. 6. Ideal for Use with Additional Shields If you're planning to install a glass panel or any other protective covering, GOB is highly recommended over standard SMD, as it's better equipped to handle the added pressure and environmental exposure. 7. Relocation If you plan to move your display to a different location, GOB modules are more likely to remain undamaged during relocation due to their protective layer.
Conclusion Both Standard SMD/LED and GOB technologies have their own unique advantages, making each suitable for different applications. If you're looking for a cost-effective solution with high brightness and easy repairability in controlled environments, standard SMD/LED is a solid choice. On the other hand, if your display requires added protection, easier maintenance, and greater durability in harsh conditions, GOB offers a reliable alternative. Choosing the right option depends on your specific installation environment, usage needs, and budget considerations.
*Al-Noor SMD Screens proudly introduces GOB (Glue on Board) technology in Pakistan for the first time.