Glass is undoubtedly a reliable, versatile material, and very beneficial. At some point, however, it is bound to deteriorate and break. In this article, we decided to discuss the main types of Windows and cracks in glass, and the best ways to deal with them. In addition, glass has long been a proven solution for securing our homes and commercial properties. However, some areas require higher security or security. To ensure safety, quality workmanship and the choice of glass used is a major consideration. Given standard glass easily broken when hit from accident, need extra strength, heat resistance and high level of safety glass rise to meet different application requirements. So we will also make suggestions on this.
Types of window cracks Cracks in Windows are a volatile problem. Some will assure you that they can be repaired and that there are ways to temporarily slow the spread of cracks in Windows (such as super glue or tape). However, these methods only slow down rather than prevent cracking. Eventually, window cracks will spread and completely destroy the window, so it is best to replace the window ahead of time. But did you know that your Windows may develop different types of cracks? Here are some of the most common types of window cracks that can lead to window replacement.
Impact cracks Impact cracks are caused by objects or debris striking Windows or glass surfaces. These cracks are often caused by wayward toys and balls that end up being thrown at Windows. Stormy weather can also strike cracks when branches, pine cones or other tree debris are blown through Windows.
Stress crack Like pressure cracks, stress cracks can be caused by significant changes in weather and outdoor temperature. However, unlike pressure cracks, these usually occur very slowly and gradually. A stress crack usually begins at the edge of a glass plate, then grows larger over time and extends throughout the glass. Closing Windows can also cause stress cracks.
Edge cracks Edge cracks look almost identical to stress cracks. They also originate at the edges of Windows and spread out in a zigzag pattern. However, the edge crack was not due to any change in temperature, but to damage to the edge of the window. If you want to know whether the crack is caused by thermal stress or damage to the window edge, check the window edge for small “oyster” fragments. They are often hidden under window seals, making them hard to find. Another way to tell is to look at the direction of the crack. Stress cracks are found throughout the window, and edge cracks tend to extend outward from the point of damage. In either case, edge cracks or stress cracks usually result in window replacement.
Pressure crack If you have double glazing or insulated glazing, you need to worry about pressure cracks. Pressure cracks seem to have popped up. However, the root cause is usually a dramatic change in environmental pressure due to changes in weather. Windows installed at very high or very low altitudes are at risk of developing these cracks. Pressure cracks are most likely to curve in an hourglass shape, so this is another way to identify them. If you believe your window has pressure cracks, replacing the window may be the only solution.
Spontaneous rupture In rare cases, Windows may break of their own accord. This happens most often with tempered glass, especially if modifications have been made to tempered glazing glass. If not made properly, the chemicals can evaporate onto the Windows. You may not notice any problems until one day the glass breaks. In this case, replacing a window is not only the only option, but the manufacturer of the replacement window should be carefully chosen.